All Products

UTT BC4 is a compact structural attachment with UL and FM certification, made of carbon steel and QT450 ductile iron, available in black or galvanized finish. It complies with WW-H-171, ANSI/MSS-SP-58 and ANSI/MSS-SP-69 standards, offered in M10 and M12 sizes with a maximum working load of 6.8kN. Designed for installation on the top and bottom of metal beams, purlins, channel steel and angle iron, it requires the setscrew to be tightened and torqued against the sloped side of I-beams.

UTT8002 dual-material insulated pipe clamp is fitted with graded thickness closed-cell polyurethane inserts to cut off cold bridge and avoid pipeline condensation. Available in zinc-plated carbon steel and stainless steel, it covers DN15~DN300 (1/2''~12'') with optional PU thickness of 20/25/30/40/50mm, specially designed for chilled water, condensate and low-temperature steam condensate pipelines with tiered working load ranging from 0.9kN to 8.93kN.

UTT83 zinc plated carbon steel square saddle clamp is specially shaped for tight fitting on square/rectangular pipes, conduits and solid bars, with pre-drilled bolt holes on both ends for stable fastening, widely used for electrical conduit and industrial rectangular pipeline fixed installation.

UTT81 zinc plated carbon steel U-bolt is heavy-duty pipe fixing component for supporting, guiding and anchoring heavy load pipelines from 1/2''~8'', equipped with optional 2 or 4 nuts plus matching washers, multiple thread sizes from M6 to M22 for diversified engineering installation.

UTT62 zinc plated plain pipe clamp made of carbon steel, uniquely designed with flared edges and protective plastic washers to avoid CPVC/ plastic pipe crushing, easy-close locking structure, covers 1/2''~4'' for vertical pipeline fixing with graded rated load from 1110N~1950N.

UTT61 rubber lined quick lock pipe clamp available in carbon steel(zinc plated) and stainless steel, built-in rubber lining for shock absorption, M8/M10 welded nut & M6 side screw quick locking structure, covers 3/8''~8'' for indoor drinking water, heating and industrial pipeline fastening.

UTT60 UL & FM certified split standard pipe clamp complies with A-A-1192A & MSS SP-58/SP-69 Type8, three optional finishes(black/painted/galvanized), carbon steel construction sized DN15~DN200(1/2''~8''), plain steel up to 650°F & galvanized up to 450°F, matched with weldless eye nut/eye rod for horizontal steel pipe suspension.

UTT50 UL & FM approved galvanized carbon steel riser clamp complies with MSS SP-58/SP-69 Type8 standard, designed for vertical pipeline stabilization from DN15(1/2")~DN200(8"), high temperature resistance up to 450°F(galvanized)/650°F(plain steel), installed below pipe coupling with graded max load 3.34~18.02kN for fire riser piping system.

UTT1103 multi-finish carbon steel adapter connects C41 channel with I-beam & H-beam without drilling, freely adjustable channel length & position, used in pairs, rated load 9000N with four optional surface treatments for seismic bracing projects.

UTT1102 electro-galvanized QT450 ductile iron pivoting beam adapter features 1/2" & M12 mounting hole, fits pipeline up to 8", adopts cone point break-off bolt locking and free pivoting design for multi-angle NFPA13 compliant seismic sway bracing installation.

UTT1101 electro-galvanized QT450 ductile iron beam adapter clamps steel beam from 3/8'' to 1-1/4'' thickness without drilling or welding, supports bracing for up to 8'' pipe per NFPA13 sway bracing requirements.

UTT63 electro-galvanized carbon steel suspension clamp is designed for bare hot and cold pipeline without insulation, ranging from 1/2" to 8", max design load 9000N with break-off set screw locking structure for stable pipeline suspension.